This product is unfortunately no longer available. You are sure to find a cool alternative in our online store!
Aspire brings with the Vilter Pod Kit an innovative and very compact starter kit. It was made of a lightweight aluminum alloy with a size of 107.2 mm x 22 mm x 12.5 mm and a weight of only 30.8 g. Thus, the Vilter Pod Kit is not only excellent in the hand, it can also be easily stowed in any pocket. The Vilter Pod Kit is powered by a 450 mAh battery, which is permanently installed in the device. The pod kit can also be quickly recharged with 0.5A via the USB Type-C port on the side. The output power of the Vilter Pod Kit is a constant 3.7 V. You won't find any settings on the elegant Vilter Pod Kit, because it has a built-in automatic draw that works reliably. Only an LED on the front informs the user about the operating status and the battery level. In the Vilter Pod Kit, various protective functions such as draw time limitation, short-circuit protection, overheating protection, low-voltage protection, overcharging protection and deep discharge protection have also been installed to enable safe vaporizing.
From above, the vilter pods are pushed into the battery carrier. These are made of food-safe PCTG and offer space for 2 ml of liquid. Filling is done from the bottom, for this the small silicone tab is opened and the liquid is put into the tank. Inside the slightly darkened pod is a 1.0 Ohm coil permanently installed, it is perfectly matched to the performance of the Vilter Pod Kit. The airflow is from both sides through a small air hole in the mod, so a classic MTL draw behavior can be achieved. The ergonomically shaped mouthpiece also contributes its part. Who likes to have it even more cigarette-like, can also use the filter mouthpieces instead of the mouthpiece. Thus, the draw behavior becomes even a little stricter.
A 450 mAh battery is permanently installed in the Vilter Pod Kit. This provides the necessary power for the whole day. Charging is done from the side via the USB Type-C port. The Vilter Pod Kit can be fully recharged with 0.5A in a short time. The LED light indicates the operating status and the battery level.
The Vilter Pod Kit is equipped with a built-in automatic pull. This works very reliably.
Various protection features such as draw time limit, short circuit protection, overheat protection, low voltage protection, overcharge protection and deep discharge protection have been incorporated into the Vilter Pod Kit to ensure safe vaporizing.
The Vilter Pod has a capacity of 2 ml. The filling is done from below by pulling off the small silicone tab. By magnets hold the Vilter Pods securely with on the battery carrier.
A 1.0 Ohm coil was permanently installed in the pod. This is perfectly matched to the performance of the Vilter Pod Kit and promises a pleasant MTL draw behavior. The air is guided from the side to the coil, so the best taste is guaranteed.
On the Vilter Pod is an ergonomic mouthpiece attached, this allows a classic MTL draw behavior. Who would like it even a little stricter, this mouthpiece can be replaced with a filter mouthpiece.
| Color | Orange |
|---|---|
| Tank volume | 2.0 ml |
| Ohm coil | 1.0 ohm |
| Volt | 3.7 V |
