This product is unfortunately no longer available. You are sure to find a cool alternative in our online store!
The combination of Gen X mod and NRG-S tank promises performance and best taste.
The Gen X Mod was made from an aerospace aluminum alloy. Thus, the Gen X Mod with its dimensions of 93 mm x 49 mm x 27.6 mm is not only excellent in the hand. It also offers a comfortable weight with two 18650 batteries inserted. On the 510 connection of the elegant battery carrier can be used easily vaporizers with a diameter of up to 26 mm. A micro USB port was also built into the Gen X Mod.
With the 18650 batteries inserted in the back, the Gen X Mod can perform up to 220 watts. The built-in AXON chipset allows the mod to operate in ECO mode, so a longer battery life can be achieved. A consistent vapor experience can be provided with every puff via the Pulse Mode. It also has a Smart TC mode, with this the temperature control can be easily done. In DIY mode, the user can make their own settings entirely according to their own preferences. Thereby, the Gen X Mod can be operated in a resistance range from 0.03 Ohm to 5.0 Ohm.
In order to display all information, Vaporesso has given the Gen X Mod a 0.91" OLED display. Thus, all settings can be made via the control buttons below. The fire button is located just above the display.
Further, it has 8 protections such as, overheat protection, overcurrent protection, USB input protection, low resistance protection, low battery, 10 seconds shutdown, vaporizer detection and vaporizer control to make vaporizing safe.
Made the NRG-S tank is made of stainless steel and Pyrex glass. Thus, the tank has a diameter of 26 mm and thus fits perfectly to the Gen X Mod
With its capacity of 8 ml, it offers plenty of space for liquid. The NRG-S tank is filled from above by unscrewing and sliding on the TopCap.
Inside the tank, the well-known GT coils are used. These can be changed by unscrewing. Included are a GT4 Mesh Coil with 0.15 Ohm for a power 50 to 75 watts and a GT Mesh Coil with 0.18 Ohm for a power of 50 to 80 watts. Both coils promise a very direct draw and a lot of steam and best taste. All other GT coils from Vaporesso can also be used.
The bottom airflow allows the air to flow directly to the coil and thus promises a pleasant draw feeling. It can also be adjusted and so the draw resistance to your own needs.
Vaporesso has made the Gen X Mod from an aluminum alloy from aircraft technology. With two 18650 batteries, the mod can provide up to 220 watts. It also has a micro USB port. On the elegant mod can be used vaporizers up to 26 mm in diameter.
Customize.
The Gen X mod is equipped with the Axon chip. This has 4 different modes (Pulse Mode, Power Eco, Smart TC and DIY).
All necessary information can be read on the 0.91" OLED display. All settings can be made via the control buttons below the display.
The Gen X Mod has 8 protections such as, overheat protection, overcurrent protection, USB input protection, low resistance protection, low battery, 10 seconds shutdown, vaporizer detection and vaporizer control to make vaporizing safe.
NRG-S tank is made of stainless steel and Pyrex glass and offers a diameter of 26 mm.
It offers a tank volume of 8 ml. Filling is done from the top by unscrewing and sliding on the TopCap.
Inside the NRG-S tank find the well-known GT Coils from Vaporesso your place. Included are a GT4 Mesh Coil with 0.15 Ohm for a power 50 to 75 watts and a GT Mesh Coil with 0.18 Ohm for a power of 50 to 80 watts. Both coils promise a very direct draw. All other GT coils can also be used.
The coils can be changed simply by unscrewing them.
| Evaporator types | Finished evaporator |
|---|---|
| Product type | . |
| Tank volume | 8.0 ml |
| Power range (W) | 220 W |
