The Drag X plus pro from Voopoo, the Drag X plus professional version!
After the Drag X plus, you will now discover the Drag X plus pro Voopoo. It is very similar to its predecessor, with some differences. The design is more rounded for a better grip. The chipset is even more powerful and the TPP clearomizer is present in version 2.0. This set leaves room for a DL draw resistor for big clouds of vapor.
The Drag X plus pro box from Voopoo.
The design of the Mod Drag X plus pro is very similar to the Drag X plus. However, the shape is more rounded to ensure a high comfort in the hand. Made of zinc alloy and synthetic leather, the box remains compact and lightweight (133 g for the complete set).
So you can steam for a long time, the box works with a 18650 battery (with the included adapter) or a 21700 battery. Attention, the battery is not included! For the 21700 format, only the following batteries are compatible: Efest 21700 / Listman 3800 mAh 21700 / 40T Samsung 21700 / 21700 VTC6A. As with the first Drag X plus, the battery door is located on the bottom of the mod. For quick charging, use the included USB-C cable (5V/2A). However, we strongly recommend charging the battery via an external battery charger to preserve battery life.
The Gene Fan 2.0 chipset has also been improved to please both novice and experienced steamers. This is ultra responsive, namely in just 0.001 seconds. As with the Drag X plus, it offers all the necessary safeguards against short circuit, overcharging, overheating, excessive discharge and reverse polarity.
You can access the various modes and the train counter via the 0.96" TFT color display:
- Smart: automatic adjustment of power between 5 and 100W depending on the value of the installed vaporizer head (perfect for beginners).
- RBA: for Reconstructibles (ideal for experts).
Switching modes is very simple! Press the Fire (Switch) button three times. Don't know which mode you are in? Just look for the letter to the right of the power (in watts):
- Smart: S
- RBA: R
The Drag X plus Pro offers two different surfaces/screen displays, depending on what you prefer: vertical (Iron) and horizontal (Core). To switch, press both the "-" and "+" keys.
The TPP 2 clearomizer for even more big clouds of steam.
You probably know the TPP Clearomizer! But this is the even more powerful version 2! Made of stainless steel and PCTG, the TPP 2 sub-ohm clearomizer offers an airy and tasty DL draw resistance! The airflow has been changed. So the airflow leads to an optimal air distribution on the coil for even more flavor. You can adjust the airflow for more or less vapor clouds with the airflow ring on the bottom of the tank.
The TPP tank has a new 810 Drip Tip for a unique style, but not only that! This mouthpiece prevents splashing of e-liquid and condensation for a pleasant vapor experience.
With its 5.5 ml capacity, you can easily fill your tank from the bottom. To do so, simply pull on the magnetic TPP-2 cartridge, turn it over and lift the silicone cap. Prefer a liquid with a PG/VG ratio of 50/50 over 20/80. Also note that the tank is made of PCTG for strength.
The Voopoo TPP Clearomizer is compatible with TPP vaporizer heads, 2 of which are included:
- TPP-DM1 with 0.15 Ohm: very airy vapor with fewer flavors - to use between 60 and 80 W.
- TPP-DM2 with 0.2 Ohm: very airy vapor with more flavor - To use between 40 and 60 W.
These coils are single mesh with dual heating zone for faster heat up and exceptional flavors. To change the resistor, remove the magnetic cartridge and turn it over. Then pull out the used coil, insert the new coil into the slot. Wait 10 minutes before you start vaporizing.
With which accessories should I use the Voopoo Drag X plus pro box?
Let's start first with the Drag X plus pro box. You can use it with the TPP 2 clearomizer, but also with all other clearomizers up to a diameter of 29 mm. In addition, this box recognizes vaporizer heads between 0.1 ohms and 3 ohms. For an aesthetic set, you should prefer a clearomizer with a diameter of 25 mm.
Now we come to the tank! It is equipped with a 510 pin and can be screwed on boxes with a width of at least 25 mm. For an aesthetic set, you should also choose a mod with a width of 25 mm here. That's not all! The TPP vaporizer is also compatible with the following cartridges:
- PNP cartridge: the same as for Drag X and S, for use with PNP vaporizer heads.
- VSuit PNP MTL cartridge: for tight MTL draw resistance rich in flavors.
- PNP cartridge RTA: for lovers of Reconstructible.
Scope of delivery:
- 1 Drag X plus per box
- 1 Clearomizer TPP 2.0
- 1 DM1 evaporator head with 0.15 Ohm
- 1 DM2 vaporizer head with 0.2 Ohm
- 1 USB-C cable
- 1 Instruction manual
Product Features:
- Dimensions: 141 x 35 x 29 mm
- Weight: 133 g
